PISTON FILLER with preset constant volume - 1 or 2 dispensers
Air-cooled liquid chillers - Basic acoustic configuration 382 ÷ 1945 kW
€ 122,500
Nominal cooling capacity 382 ÷ 1945 kW.
The chillers of the iPHOENIX G series, with low GWP R513A refrigerant, represent the inverter solution for the refrigeration of liquids for medium and large processes, guaranteeing energy efficiency levels in line with the requirements of the ErP EcoDesign directive. The screw compressors used in iPHOENIX G chillers, thanks to the use of variable speed inverter technology, are able to modulate the cooling capacity delivered in situations of high load variability. The modular condensing section allows you to progressively stop the fans according to the instantaneous thermal load, also contributing to increasing the seasonal energy efficiency of the units.
Low GWP R513A refrigerant;
High seasonal energy efficiency (SEPR HT);
Maximum flexibility in adapting to any operating condition thanks to the variable speed inverter technology and the Step regulation logic;
Extended operational limits;
Complete safety equipment: continuous monitoring of the operating range of the compressors and the oil level in the crankcase; HP / LP pressure switches, phase monitor, crankcase heaters and differential pressure switch;
Wide range of accessories and kits for customized solutions.
Standard features:
R513A refrigerant;
Single refrigerant circuit with screw compressor optimized for R513A refrigerant gas and variable speed inverter technology (single circuit unit) and double refrigeration circuit (1 + i) with screw compressors with variable speed inverter technology and Step regulation (two circuit unit);
Resistance for heating the oil in the compressor crankcase and phase monitor;
Condensing coils (copper pipes / aluminum fins) with transverse “V” arrangement;
Electronic expansion valves;
Shell and tube evaporator optimized for R513A;
Victaulic hydraulic connection kit supplied as standard with each unit;
Degree of protection of the electrical panel IP54;
Programmable control with high calculation capacity and easy-to-use graphic interface; connectivity and supervision through Ethernet, USB, RS485 Modbus ports.
Acoustic configurations:
HE - Basic acoustic configuration;
SSN - Super silenced acoustic configuration.
This type of article can be 100% customized to your needs;
We produce custom-designed equipment request a free quote - CONTACT US -
Description
Options:
Minimum ambient temperature -20 ° C;
Single low or medium head pump;
Double twin pump with low or medium head;
Inertial storage tank (up to model 6002);
Antifreeze protection resistances for heat exchangers and hydraulic unit (if present);
Compressor shut-off valves (suction);
AC axial fans (standard for HE);
High efficiency EC Brushless fans (standard for SSN - option for HE);
Micro-channel condensing coils;
Condensing coils with anti-corrosion treatments;
Metallic mesh filters to protect condensing coils;
Compressor soundproofing panel (for HE configuration);
Complete soundproofing paneling of the hydraulic compartment and compressor compartment;
Total heat recovery (up to model 6002).
Kits sold separately:
Antivibration supports;
Metallic mesh filters to protect condensing coils;
Replicated remote user terminal;
RFI filter;
XWEB300D EVO supervision system;
Modularity kit, for master / slave network management from 3 to 7 units.
Product Details
MTA0013
14 other products in the same category:
Table-top machines
Compressor on request.
Piston filler capable of filling even dense...
Price
€ 1,710
VOLUMETRIC FILLER with pre-set constant volume syringe 0-20ml
Manual Volumetric FILLER with dosing syringe with preset constant volume
It sucks in silicone...
Price
€ 371
PRELAFRO - PRELEVATOR for autoclave tank - connections 50 garolla, 50 din male with ring nut, 1"...
For filling bottles with sparkling wine to be sampled directly from the autoclave under...
Price
€ 618
Air cooled liquid chiller - Super low noise acoustic configuration 375 - 1908 kW
Nominal cooling capacity 375 - 1908 kW
These chillers represent the best solution for the...
Price
€ 114,400
NITROGEN GENERATOR "AP" 25,5 Nmc/h
Assembled on metal frame, system certified according to CE/97/23 PED, product gas suitable...
Price
€ 24,203
Aphrometer for bottles with crown cap diameter 26 mm
Aphrometer for measuring carbon dioxide (CO2) pressure in for bottles with crown cap diameter...
Price
€ 212
Compact, energy-saving, ductless Ascent Opti™ type fume extraction hood.
Independently tested...
Price
€ 5,293
Aphrometer for full bottles without cap
Aphrometer for measuring carbon dioxide (CO2) pressure in full bottles without stopper,...
Price
€ 84
Single-cylinder Vertical Volumetric Doser
Pneumatically operated to pack liquid products in cans or bottles in plastic or other materials...
Price
€ 5,320
Sanitise vehicle interiors. This 'column' generator will allow you to remove all contamination...
Price
€ 3,640
Single-screw floating stator pump 10-2000 rpm - 2-53 hectolitres / hour - THREE-PHASE INVERTER...
1.5KW IE3 4P THREE-PHASE WITH IP66 THREE-PHASE INVERTER AND SERVO-VENTILATION
Flow rates:...
Price
€ 3,110
NITROGEN GENERATOR "AP" 3 Nmc/h
Assembled on metal frame, system certified according to CE/97/23 PED, product gas suitable...
Price
€ 7,829
SEMIAUTOMATIC LABELLER (cylindrical, conical, square, shaped and special formats - 550 bottles/hour)
The labelling system uses a rotation plate and pneumatic locking of the container neck. This...
Price
€ 15,830
Water-cooled industrial liquid chiller bi-frequency version kW 60Hz - 12.4 - 191.7 kW
They are compact units designed for use in an industrial environment, equipped with hermetic...
Price
€ 11,100